UpWork (oDesk) & Elance Fiber Optics Test Question & Answers

UpWork (oDesk) & Elance  Fiber Optics Test Question & Answers are really very important to pass UpWork & Elance test. You will get top score at this skill test exam. If you found any problem or wrong answer please inform me via contact or comments. We will try to solve it in short. This test is extremely valuable to acquire knowledge of Fiber Optics. Lets Start test.

Ques : For a step index fiber, relationship between numerical aperture (NA) and coupling efficiency (?c) is ________.
Ans  : b

Ques : Mirrors are placed in LASER optical sources to maintain conditions for ________.
Ans  : amplification

Ques : Optical bandwidth (OB) relates to electrical bandwidth (EB) when
Ans  : OB>EB

Ques : What is the thermal noise current it in a resistor R expressed in its mean square value?

where, K is Boltzmann's constant, T is absolute temperature and B is the bandwidth
Ans  : c

Ques : For a profile parameter (a)=1, the profile shape of refractive index for a graded index fiber will be _______.
Ans  : parabolic

Ques : The rays which travel in a helical path through an optical fiber are called ______.
Ans  :  skew rays

Ques : Dark spot defects (DSD's) occur in:
Ans  : Fiber LASER

Ques : What happens when dispersion occurs?
Ans  : Output transmitted pulse gets completely eliminated

Ques : Silicon reach through avalanche photodiodes has _______.
Ans  :  maximum absorption of electrons

Ques : The vapor-phase deposition technique is used to produce _______.
Ans  : fiber-rich glasses

Ques : Scattering losses happen due to
Ans  :  imperfections in glass manufacturing process

Ques :  Graded-index fibers have:
Ans  : None of these

Ques : Dispersion in optical fibers causes distortion in _______.
Ans  : digital signals only

Ques : The LASER is a/an
Ans  :  incandescent device

Ques : SONET is _________.
Ans  : Silicon optical network

Ques : In p-i-n photodiodes "i" stands for:
Ans  : Intrinsic

Ques : Dispersion is the lowest in a________.
Ans  : Multimode graded-index fiber

Ques : Superluminescent LED's are preferred because of _______.
Ans  :  low output power

Ques : Total internal reflection takes place at angles ________.
Ans  : greater than the critical angle

Ques : LED is more suitable for analog transmission because of its _______.
Ans  : modulation property

Ques : When optical power is incident on the photo detector during the 0 bit period, then the system is said to exhibit _______.
Ans  : a zero extinction ratio

Ques : Which of the following is a fiber dispersion measurement method?
Ans  : Time domain measurement

Ques : Germanium photodiodes are generally not preferred in the optical fiber system because of _________.
Ans  : large dark current

Ques : Which one of the following is a type of non-linear scattering?
Ans  : Ultraviolet scattering

Ques : Refer to the figure above.

The critical angle at the core cladding interface is given by:
Ans  : c

Ques : Intersymbol interference (ISI) in optical fibers occurs due to ______.
Ans  : scattering

Ques : Near-field scanning method is used to measure:
Ans  : Fiber attenuation

Ques : Which phenomenon does not let light rays escape an optical fiber?
Ans  :  Total internal diffraction

Ques : Quantum efficiency (?) is defined as
Ans  : c

Ques : Which of the following is an Optical System Design Software?
Ans  : Photonic Transmission Design Suite (PTDS)

Ques : COBRA (commutateur optique binaire rapide) is an ________.
Ans  :  optical detector

Ques : For a multimode optical graded index fiber, the profile parameter (a) will be equal to:
Ans  : 8

Ques : What would the optical return loss (ORL) be defined as when r-fresnal reflection occurs at a fiber-air interface?
Ans  : ORL= -20log10r

Ques : When microwave frequency rather than radio frequency subcarriers are employed, the strategy is usually referred to as ______.
Ans  :  Code-division multiplexing

Ques : FDDI can support a data rate of
Ans  :  100 Mbps

Ques : Numerical aperture (NA) is related to the refractive indexes of core (n1) and cladding (n2) when,
Ans  : b

Ques : What does TPON stand for?
Ans  : Telephony on a polarized optical network

Ques :Light emitting diodes (LED's) are:
Ans  : None of the above

Ques : A multimode graded index fiber exhibits total pulse broadening of 0.2 µsec over a distance of 10Km. Estimate the maximum possible bandwidth assuming that there is no inter-symbol interference.
Ans  : 1 MHZ

Ques : Homodyne detection is used for _______.
Ans  : incoherent systems

Ques : Avalanche photodiodes are ________.
Ans  : more sensitive than simple photodiodes

Ques : Hydrogen absorption by optical fiber causes _______.
Ans  : an increase in optical fiber losses

Ques : For an ideal photo detector, the absorption coefficient must be ______.
Ans  : large

Ques : Rayleigh scattering is a ________.
Ans  :  non-linear scattering

Ques : FDDI is _______.
Ans  : Fiber distributed data interface

Ques : Macro bending losses in optical fibers can be reduced by designing the fibers with ________.
Ans  : a fiber glass

Ques : Metallic impurities are eliminated from optical fiber by:
Ans  :  Vapor axial deposition (VAD) method

Ques : The information carrying capacity of optical fibers is in the range of:
Ans  : MHZ

Ques : The first generation optical fibers are fabricated from:
Ans  :  Gallium aluminum arsenide alloys

Ques : The Nd:YAG LASER is a/an_______.
Ans  : injection laser

Ques :   Optical time domain reflectometry (OTDR) is a/an ________.
Ans  : attenuation measurement technique

Ques :  What is the relationship between refractive index (n1) of core and refractive index (n2) of cladding for an optical fiber?
Ans  :  n1 < n2

Ques : SOLITON is a/an ______.
Ans  : type of optical fiber

Ques :  What is signal attenuation in an optical fiber where P1=Input power and P0=Output power
Ans  : c

Ques : Index optical fibers are sometimes referred to as:
Ans  : Homogenous core fibers

Ques : IEEE 802.5 is a/an ________.
Ans  : Token ring

Ques : The cutback technique is a/an _______.
Ans  : refractive index measurement technique

Ques : he refractive index is defined as the ratio of ____________.
Ans  : the velocity of light in the medium to the velocity of sound in a vacuum

Ques : The population inversion phenomenon in optical sources occurs when _________.
Ans  :    None of the above

Ques : Intermodal dispersion is less in a __________.
Ans  :  Multimode step index fiber

Ques : The fiber gyroscope is an ______.
Ans  : Intrinsic fiber sensor

Ques : One polarization maintaining fiber operates at a wavelength of 1.5 µm and has a beat length of 0.6mm. Its modal birefringence is given by _______.
Ans  :  1.5 x 10-3

Ques : The output power of a LASER is greater than that of a LED because of _____.
Ans  :  spontaneous emission

Ques : Dispersion is low in the __________.
Ans  :  Multimode step index fiber

Ques : Surface emitter LEDs have high radiance because _______.
Ans  : of n-type diffusion into the p-type substrate

Ques : LASER stands for:
Ans  :  Light amplification by straight emission of radiation

Ques : Dark line defects (DLDs) occur when:
Ans  : mobile impurities are displaced into the active region of LASER

Ques : Which of the following is a characteristic of an injection LASER?
Ans  : Amplification

Thanks for watching this test Question & Answers. Please don't forget to leave a comment about this post. You can also find some more effective test question & answers, information, techniques, technology news, tutorials, online earning information, recent news, results, job news, job exam results, admission details & another related services on the following sites below. Happy Working!
News For Todays ARSBD UpWorkElanceTests ARSBD-JOBS DesignerTab UpLance

Share this

Related Posts

Next Post »

We recommend you to subscribe us to get update from your email. EmoticonEmoticon